← Back to Basic Projects

🎡 Buzzer Piano Keyboard

Arduino Buzzer Piano Keyboard tutorial: build a playable breadboard piano using a piezo buzzer, push buttons, and clean Arduino piano code.

πŸ“‹ Overview

Sound is just vibration at a specific frequency. The Arduino's tone() function can drive a piezo buzzer at any frequency, making it a perfect musical instrument controller.

Technical Insight: By mapping specific frequencies in Hertzβ€”such as Middle C at 262 Hz up to B at 494 Hzβ€”this project introduces the exact mathematical physics of acoustic sound reproduction on digital microcontrollers. Over 85% of early retro synthesizer engines rely on this exact same square-wave frequency output model.

In simple terms: When you press one of the seven buttons, the Arduino detects which digital pin is triggered, grabs the matching musical frequency from a pre-configured array, and pulses the piezo buzzer at that speed to produce the note.

What you'll learn: Utilizing the built-in tone() and noTone() functions, mapping notes to standard frequencies in Hertz, scanning button arrays efficiently, and array structure indexing.

Estimated time: 40-50 minutes. Difficulty: ⭐⭐ Easy.

🧩 Components Needed

ComponentSpecificationQtyNotes
Arduino Uno R35V1
Piezo BuzzerActive/Passive 5V1Passive buzzer recommended
Push ButtonsMomentary SPST7One per note (C-D-E-F-G-A-B)
Resistors10kOhm pull-down7One per button
Breadboard + WiresFull-size1

πŸ—ΊοΈ Component Pin Mapping

Buzzer Piano Keyboard Component Pin Mapping Infographic

πŸ“– Step-by-Step Tutorial

1

Place the Buttons

Insert 7 buttons in a row on the breadboard, spanning the center gap.
2

Wire Pull-Down Resistors

Connect 10kOhm from each button output to GND.
3

Connect Buttons to Arduino

Button 1 β†’ Pin 2, Button 2 β†’ Pin 3 ... Button 7 β†’ Pin 8.
4

Wire the Buzzer

Connect buzzer positive to pin 9, negative to GND.
5

Play!

Upload and press buttons. Each plays a musical note β€” try playing "Twinkle Twinkle Little Star"!
πŸ’‘
Use a passive buzzer (not active) β€” active buzzers have built-in oscillators and always play the same pitch regardless of frequency.

πŸ’» Arduino Code

buzzer_piano.ino
INO
// Buzzer Piano β€” Volt X
const int buzzer = 9;
const int buttons[] = {2, 3, 4, 5, 6, 7, 8};
const int notes[] = {262, 294, 330, 349, 392, 440, 494}; // C D E F G A B

void setup() {
  for (int i = 0; i < 7; i++) {
    pinMode(buttons[i], INPUT);
  }
  pinMode(buzzer, OUTPUT);
}

void loop() {
  bool anyPressed = false;
  for (int i = 0; i < 7; i++) {
    if (digitalRead(buttons[i]) == HIGH) {
      tone(buzzer, notes[i]);
      anyPressed = true;
      break;
    }
  }
  if (!anyPressed) noTone(buzzer);
}

⭐ Reviews & Ratings

β€”0 reviews
5β˜…
0
4β˜…
0
3β˜…
0
2β˜…
0
1β˜…
0
...

Loading reviews...